Sunday, 12 May 2013
-001.jpg "S4 BTech (2008 Scheme - Applicable for Regular, Improvement, Supplementary, Transitory candidates and candidates of the 2003 and prior to 2003 schemes admitted up to 2002 and who have been granted a mercy chance) Degree Examination May/June 2013 Time Table")
-002.jpg "S4 BTech (2008 Scheme - Applicable for Regular, Improvement, Supplementary, Transitory candidates and candidates of the 2003 and prior to 2003 schemes admitted up to 2002 and who have been granted a mercy chance) Degree Examination May/June 2013 Time Table")
Thursday, 9 May 2013
Wednesday, 8 May 2013
Tuesday, 7 May 2013
Kerala University Press Release : Time Change for B.Tech. Exam,Fourth and Sixth Semester B.Tech Mercy Chance Exam,Akshaya Kendra and Related Institutions Training,PG Enterance Exam Date Extended,BHMS Results,Grace Grade Application Submission,MCom and MBA Classes,Bsc Hotel Management Practical Timetable,CBCSS Career Related Degree Exam,IDE Valuation Panel,Chinese Language and Arts :Small Term Courses
Monday, 6 May 2013
Saturday, 4 May 2013
Kerala University B.Tech. Computer Science Sixth Semester Previous Questions Download
Compiler Design University Questions
Computer Communication University Questions
Computer Graphics University Questions
Advanced Microprocessor University Questions
Software Project Management University Questions
Computer Communication University Questions
Computer Graphics University Questions
Advanced Microprocessor University Questions
Software Project Management University Questions
Friday, 3 May 2013
Kerala University Press Release for Change of Examination center,First year B.com Exam Centre,B.A First Year Exam,Project Evaluation of B.A.English and Communicative English Exam,Bsc Nursing Exam Results,MBBS Results,Bsc Practical Time Table,B.A Music Practical Exam, Mark list Distribution,Bsc Practical,Bsc Board Meeting,Project Fellow in Kerala University Sociology Department
Kerala University B.Tech. Computer Science Seventh Semester Previous Questions 2003 Scheme Download
Computer Networks University Questions
Principles of Programming Language University Questions
Digital Image Processing University Questions
Computer Peripherals and Interfacing University Questions
Principles of Programming Language University Questions
Digital Image Processing University Questions
Computer Peripherals and Interfacing University Questions
Thursday, 2 May 2013
Download Kerala University B.Tech. Computer Science Question Papers Eighth Semester 2003 Scheme
Internet Technology University Questions
Computer Architecture and Parallel Processing University Questions
Software Engineering University Questions
Distributed Systems University Questions
Neural Computing University Questions
Wireless Network University Questions
Computer Architecture and Parallel Processing University Questions
Software Engineering University Questions
Distributed Systems University Questions
Neural Computing University Questions
Wireless Network University Questions
Wednesday, 1 May 2013
Kerala University B.Tech.Combined First and Second Semester Basic Communication and Information Engineering Previous Questions 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08-109 : BASIC COMMUNICATION AND INFORMATION ENGINEERING
PART – I
Answer all questions1. Compare the characteristics of JFET with BJT.
2. Draw the CMOS inverter circuit.
3. Briefly explain the ion implantation process.
4. Give the principle of FM demodulation.
5. Briefly explain an application of radar.
6. What are the functions of a satellite transponder ?
7. What is the memory hierarchy in a computer system ?
8. What are the transmission guided media in a communication system ?
9. Briefly explain the WLL technology.
10. What are the functions of a router in a network ?
Kerala University B.Tech. Combined First and Second Semester Basic Electrical and Electronics Engineering Previous Questions 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
08-108 : BASIC ELECTRICAL AND ELECTRONICS ENGINEERING
(2008 Scheme)
Instructions : 1) Answer all questions from Part – A and three full questions from Part – B.
2) Choosing not more than one question from each Module.
PART – A
1. Explain Kirchoff’s Laws.2. What is Lenz’s Law ? Explain.
3. Distinguish between Phase and Phase difference.
4. What is the principle of operation of transformer ?
5. Name eight substation equipment.
6. Differentiate between MCB and ELCB.
7. Draw V-I characteristics of P-N Junction Diode.
8. Draw the schematic of L.T. switch board.
9. What are energy efficient lamps ? Explain any one.
10. What are transducers ? Explain.
Kerala University B.Tech. Combined First and Second Semester Basic Mechanical Engineering Previous Questions 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08-107 BASIC MECHANICAL ENGINEERING
(2008 admission)
Answer all questions from Part A and any two questions from each Module of
Part B :
PART – A
1. Write down an expression for the air-standard efficiency of Diesel cycle. Whatare the factors affecting the efficiency ?
2. Sketch the p-v and T-s diagram of the Carnot cycle and name the different processes
and what is its efficiency ?
3. Explain CRDI system.
4. Compare two stroke and four stroke engines.
5. What are the important properties needed for refrigerants ?
6. Differentiate between impulse and reaction steam turbines.
7. Explain the terms slip and velocity ratio with respect to belt drive.
8. Explain rolling and forging processes.
9. What is the working principle of EDM ?
10. What are the elements of CNC machines ?
Kerala University B.Tech Combined First and Second Semester Basic Civil Engineering Previous Question 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08-106 BASIC CIVIL ENGINEERING
PART – A
Answer all questions.1. Explain the principles of surveying.
2. List out the errors in tape measurement.
3. Sketch a typical page in a levelling field book.
4. Mention the characteristics of contour maps.
5. What is bearning capacity of soil ? How will it affect the selection of foundation ?
6. What is the criteria of selection of roofing materials ?
7. Differentiate between precast and prestressed concrete.
8. Explain any two systems of vertical transportation.
Kerala University B.Tech. Combined First and Second Semester Engineering Mechanics Previous Question 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08 -105 : ENGINEERING MECHANICS
PART – A
Answer all questions under Part A. Each carries 5 marks.1. State the Varignon’s principle and differentiate between moment of a force and a
couple.
2. A simply supported beam AB is subjected to a distributed load increasing from
1500 N/m to 4500 N/m from end A to end B. Span AB = 6 m. Determine the
support reactions.
3. Prove that the angle of friction is equal to the angle made by an inclined plane with
the horizontal when a rigid body which is placed on the inclined plane is about to
slide downwards.
4. Explain the theorems of Pappus – Guldinus.
5. Explain instantaneous centre of rotation. How can it be located for a body moving
with combined motion of rotation ?
6. Prove that the lowest point in touch with the ground of a wheel rotating without
slipping is the instantaneous centre of the motion of the wheel.
7. Explain D’Alembert’s principle applicable to curvilinear motion.
8. Explain the terms angular momentum, angular impulse and torque.
Kerala University B.Tech.Combined First and Second Semester Engineering Graphics Previous Questions 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08-104 : ENGINEERING GRAPHICS (MNHTAB)
Instructions : i) Answer any two questions from each Module.
ii) Drawing must be neat and dimensioned.
iii) First angle projection to be followed.
MODULE – I
1. The vertex of a hyperbola is 30 mm from its directrix and the eccentricity is 4/3 .Draw the hyperbola and draw the tangent and normal at any point on the curve.
2. Construct a logarithmic spiral for one convolution. The length of the shortest radius
vector is 11 mm and the ratio of the lengths of the successive radius vectors is 6/5
for a vectorial angle of 30°. Draw the tangent and normal at any point on the curve.
3. A line AB inclined at 30° to VP has its end A 15 mm and end B 50 mm below HP.
The length of its elevation is 60 mm and its Vertical Trace (VT) is 7 mm below HP.
Draw the projections and determine the true length of the line, inclination with the HP.
Also locate its Horizontal Trace (HT).
Kerala University B.Tech.Combined First and Second Semester Engineering Graphics Previous Questions 2008 Scheme
Combined First and Second Semester B.Tech. Degree Examination, May 2009
(2008 Scheme)
08-104 : ENGINEERING GRAPHICS (MNHTAB)
MODULE – I
1. A wire unwinds itself from a drum of 50 mm radius. Draw the locus of the free
end of the wire for unwinding through an angle of 360°. Draw a tangent and
normal at any point on the curve.
2. Draw one convolution of a logarithmic spiral, given the shortest radius as 1.5 cm
and ratio of radius vectors enclosing an angle of 30° as 7 : 6. Draw tangent and
normal at any point on the curve.
3. A line PQ, 75 mm long has its end P in HP and Q in VP. The line is inclined at
45° to VP and 40° to HP. Draw the projections and locate the traces.
Subscribe to:
Posts (Atom)